ArrayIt Microarray Wash Buffers A, B and C are designed for washing cDNA microarrays and long oligonucleotide microarrays following the hybridization reaction. Arrayit Wash Buffer C is a very low salt wash buffer, 0.2 um filtered and provided as 1L of ready-to-use 1X solution.
Reagents - Microarray Buffers - Microarray Wash Buffers to Enhance VIP, Gene Expression, SNP Genotyping and CGH DNA Microarray Assays
Arrayit announces an improved and expanded product line of microarray buffers for nucleic acid microarrays. Wash Buffers A, B and C are used for cDNA and long oligonucleotide microarrays and Wash Buffers 1, 2 and 3 are designed for short oligonucleotide microarrays. Each is composition-optimized to provide the greatest hybridization stringency possible, while preserving intense signals and ensuring low background. Our wash buffers are supplied as pre-mixed 1X solutions in one-liter volumes and the ultra-pure reagents are subjected to 0.2-µm filtration and extensive quality control and quality assurance for optimal performance. Arrayit Wash Buffers remove the guesswork from the post-hybridization microarray washing process.
Table of Contents
- Introduction
- Quality Control
- Product Description
- Technical Assistance
- Short Protocol (Wash Buffers A-C)
- Complete Protocol (Wash Buffers A-C)
- Short Protocol (Wash Buffers 1-3)
- Complete Protocol (Wash Buffers 1-3)
- Troubleshooting Tips
- Scientific Publicationss
- Recommended Products
- Ordering Information
- Warranty
Introduction
Arrayit Microarray Wash Buffers are formulated to improve the precision, speed and affordability of your microarray research in genomics, biomedicine, pharmaceuticals, life sciences and agriculture. This handbook contains all the information required to take full advantage of Arrayit's Microarray Wash Buffers.
Quality Control
Arrayit uses the highest quality control (QC) and quality assurance (QA) measures to ensure the quality of our Arrayit brand Microarray Wash Buffers. The finest science and engineering was used to develop this product line. The use of advanced R&D, ultra-pure reagents, and 0.2 µm filtration guarantees that this product line outperforms the highest industry standards.
Product Description
Arrayit brand Microarray Wash Buffers A, B & C and 1, 2 & 3 are designed for post-hybridization washing of cDNA and long oligonucleotide microarrays (Wash Buffers A, B & C) and short oligonucleotide microarrays (Wash Buffers 1, 2 & 3). Users will appreciate the following features:
- Based on the finest microarray research and development (R&D)
- Excellent for gene expression and genotyping applications
- Designed for cDNAs and long oligos (A, B & C) and short oligos (1, 2 & 3)
- High stringency without reducing signal intensities
- Superior formulation reduces background
- Subjected to lot-by-lot quality control (QC) and quality assurance (QA)
- Ultra-pure reagents used for buffer formulation
- All buffers purified by 0.2 µm sterile filtration
- Provided in 1 liter bottles as 1X solutions
- Each liter of 1X buffer will wash hundreds of microarrays
- Arrive pre-mixed and ready to use
- Remove the guesswork from post-hybridization wash step
Technical Assistance
Please contact us if you have any questions, comments, suggestions, or if you need technical assistance. By electronic mail, use arrayit@arrayit.com and type "ArrayIt technical assistance" into the subject line. By email, arrayit@arrayit.com between the hours of 8AM and 8PM PST Monday through Friday. We want to hear about your successes and are always happy to publish contributed sample data on our website.
Short Protocol for cDNAs and long oligonucleotides (Wash Buffers A-C)
1. Remove cDNA or long oligonucleotide microarray slide from the hybridization cassette.
2. Wash for 5 min at room temperature in 500 ml 1X Wash Buffer A.
3. Wash for 5 min at room temperature in 500 ml 1X Wash Buffer B.
4. Dunk for 1 sec at room temperature in 50 ml 1X Wash Buffer C.
5. Spin dry for 3 seconds and scan.
Complete Protocol for cDNAs and long oligonucleotides (Wash Buffers A-C)
1. Remove cDNA or long oligonucleotide microarray slide from the hybridization cassette. After the 1-4 hour hybridization reaction, remove the microarray slide from the hybridization cassette and proceed quickly to Step 2 to prevent cooling or drying of the microarray slide. Arrayit provides Hybridization Cassettes in a variety of designs and colors, and our cassettes are recommended for best experimental results.
2. Wash for 5 min at room temperature in 500 ml 1X Wash Buffer A. To a High-Throughput Wash Station, add 500 ml of 1X Wash Buffer A and mix for a few seconds before adding the microarray slides. A Wash Station containing 500 ml of 1X Wash Buffer A is sufficient to wash 1- 25 glass microarrays (25 x 76 mm). Wash the microarrays for 5 minutes at room temperature using moderate to vigorous agitation. After approximately 30 seconds, the cover slips will loosen from the surface and should be removed carefully with a forceps to prevent the cover slips from scratching the microarrays during the wash process. Wash Buffer A is a low stringency wash buffer designed to remove excess fluorescent probe material from the surface of cDNA and long oligonucleotide (>25-mer) microarrays. After 5 minutes in 1X Wash Buffer A, proceed quickly to the next step.
3. Wash for 5 min at room temperature in 500 ml 1X Wash Buffer B. To a second High-Throughput Wash Station, add 500 ml of 1X Wash Buffer B and mix for a few seconds before adding the microarray slides. A Wash Station containing 500 ml of 1X Wash Buffer B is sufficient to wash 1- 25 glass microarray slides (1 x 25 x 76 mm). Transfer the black substrate rack containing the microarrays from Wash Buffer A to Wash Buffer B. The transfer should be made quickly to prevent drying. Wash the microarrays for 5 minutes at room temperature in Wash Buffer B using moderate to vigorous agitation. Wash Buffer B is a high stringency wash buffer designed to remove excess fluorescent probe material from the surface of cDNA and long oligonucleotide (>25-mer) microarrays. Additional stringency can be imparted by elevating the temperature of Wash Buffer B to either 37°C or 42°C. Buffer should be pre-heated in a microwave oven to the desired temperature before adding it to the Wash Station. After 5 minutes in 1X Wash Buffer B (25-42°C), proceed quickly to the next step.
4. Dunk for 1 sec at room temperature in 50 ml 1X Wash Buffer C. To a 50 ml conical tube, add 50 ml 1X Wash Buffer C and invert several times before adding the microarrays. Transfer microarrays one at a time from Wash Buffer B to the 50 ml tube containing 50 ml of Wash Buffer C. Dunk each microarray slide for 1 second to remove Wash Buffer B and proceed quickly to the next step. Wash Buffer C is designed to remove Wash Buffer B components that will cause streaks on the surface if not removed.
5. Spin dry and scan. Transfer the microarray quickly from Wash Buffer C to a Microarray High-Speed Microarray Centrifuge and spin at full speed for 3 seconds to dry the microarray slide. The microarray surface should be clean, dry and ready for scanning at this stage.
Short Protocol for short oligonucleotides (<25-mer) (Wash Buffers 1-3)
1. Remove short oligonucleotide (<25-mer) microarray from hybridization cassette.
2. Wash for 5 min at room temperature in 500 ml 1X Wash Buffer 1.
3. Wash for 5 min at room temperature in 500 ml 1X Wash Buffer 2.
4. Dunk for 1 sec at room temperature in 50 ml 1X Wash Buffer 3.
5. Spin dry for 3 seconds and scan.
Complete Protocol for short oligonucleotides (<25-mer) (Wash Buffers 1-3)
1. Remove short oligonucleotide (<25-mer) microarray from hybridization cassette. After the 1-4 hour hybridization reaction, remove the microarray slide from the hybridization cassette and proceed quickly to Step 2 to prevent cooling or drying of the microarray. Arrayit provides Hybridization Cassettes in a variety of designs and colors, and our cassettes are recommended for best experimental results.
2. Wash for 5 min at room temperature in 500 ml 1X Wash Buffer 1. To a High-Throughput Wash Station, add 500 ml of 1X Wash Buffer 1 and mix for a few seconds before adding the microarrays. A Wash Station containing 500 ml of 1X Wash Buffer 1 is sufficient to wash 1- 25 glass slide microarrays (1 x 25 x 76 mm). Wash the microarray slides for 5 minutes at room temperature using moderate to vigorous agitation. After approximately 30 seconds, the cover slips will loosen from the surface and should be removed carefully with a forceps to prevent the cover slips from scratching the microarrays during the wash process. Wash Buffer 1 is a low stringency wash buffer designed to remove excess fluorescent probe material from the surface of short oligonucleotide (<25-mer) microarrays. After 5 minutes in 1X Wash Buffer 1, proceed quickly to the next step.
3. Wash for 5 min at room temperature in 500 ml 1X Wash Buffer 2. To a second High-Throughput Wash Station, add 500 ml of 1X Wash Buffer 2 and mix for a few 30 seconds before adding the microarrays. A Wash Station containing 500 ml of 1X Wash Buffer 2 is sufficient to wash 1- 25 glass slide microarrays (1 x 25 x 76 mm). Transfer the black substrate rack containing the microarray slides from Wash Buffer 1 to Wash Buffer 2. The transfer should be made quickly to prevent drying. Wash the microarray slides for 5 minutes at room temperature in Wash Buffer 2 using moderate to vigorous agitation. Wash Buffer 2 is a high stringency wash buffer designed to remove excess fluorescent probe material from the surface of short oligonucleotide (<25-mer) microarrays. Additional stringency can be imparted by elevating the temperature of Wash Buffer 2 to either 37°C or 42°C. Alternatively, Wash Buffers 1 and 2 can be cooled from 4-20°C to reduce the stringency for short oligonucleotides. Buffers should be pre-heated or cooled to the desired temperature and then transferred to the Wash Station for the wash steps. After 5 minutes in 1X Wash Buffer 2 (4-42°C), proceed quickly to the next step.
4. Dunk for 1 sec at room temperature in 50 ml 1X Wash Buffer 3. To a 50 ml conical tube, add 50 ml 1X Wash Buffer 3 and invert several times before adding the microarray slide. Transfer microarray slides one at a time from Wash Buffer 2 to the 50 ml tube containing Wash Buffer 3. Dunk each microarray slide for 1 second to remove Wash Buffer 2 and proceed quickly to the next step. Wash Buffer 3 is designed to remove Wash Buffer 2 components that will cause streaks on the surface if not removed.
5. Spin dry and scan. Transfer the microarray quickly from Wash Buffer 3 to a Microarray High-Speed Microarray Centrifuge and spin at full speed for 3 seconds to dry the microarray. The microarray surface should be clean, dry and ready for scanning at this stage.
Figure 1. Wash buffers 1, 2 and 3 are pre-mixed 1X solutions designed for short oligonucleotide (<25-mer) microarray experiments. Arrayit buffers provide increased specificity and signal strength, while reducing background. All buffers arrive as one liter of pre-mixed 1X solutions that are ready to use.
Troubleshooting Tips
High background
- Use Arrayit Blocking Buffers prior to hybridization.
- Increase stringency by elevating temperature of Wash Buffer B or 2.
- Fluorescent probe is drying out during hybridization. Reduce hybridization time to 4 hours maximum and make sure Cassette is hydrated.
Low signals
- Reduce stringency of Wash Buffer B or 2 by reducing temperature.
- Check probe-labeling efficiency.
- Check mRNA quality.
Scientific Publications
Click on the links for recent scientific publications using Arrayit Microarray Wash Buffers for microarray research.
Recommended Products
Ordering Information
Product
|
Description
|
Catalog
ID
|
Microarray Wash Buffer A,
1 liter of 1X solution
|
Arrayit Microarray Wash
Buffer A is a high salt and detergent wash buffer for cDNAs and long
oligonucleotides (>25-mers), providing low stringency for the first wash
step. Wash Buffer A is 0.2 µm-filtered and arrives ready to use as 1 liter of
1X solution.
|
WBA
|
Microarray Wash Buffer B,
1 liter of 1X solution
|
Arrayit Microarray Wash
Buffer B is a low salt and detergent wash buffer for cDNAs and long
oligonucleotides (>25-mers), providing high stringency for the second wash
step. Wash Buffer B is 0.2 µm-filtered and arrives ready to use as 1 liter of
1X solution.
|
WBB
|
Microarray Wash Buffer C,
1 liter of 1X solution
|
Arrayit Microarray Wash
Buffer C is a very low salt wash buffer for cDNAs and long oligonucleotides
(>25-mers), providing a high stringency rinse buffer for the third wash
step prior to scanning. Wash Buffer C is 0.2 µm-filtered and arrives ready to
use as 1 liter of 1X solution.
|
WBC
|
Microarray Wash Buffer 1,
1 liter of 1X solution
|
Arrayit Microarray Wash
Buffer 1 is a high salt and detergent wash buffer for short oligonucleotides
(<25-mers), providing low stringency for the first wash step. Wash Buffer 1
is 0.2 µm-filtered and arrives ready to use as 1 liter of 1X solution.
|
WB1
|
Microarray Wash Buffer 2,
1 liter of 1X solution
|
Arrayit Microarray Wash
Buffer 2 is a low salt and detergent wash buffer for short oligonucleotides
(<25-mers), providing high stringency for the second wash step. Wash
Buffer 2 is 0.2 µm-filtered and arrives ready to use as 1 liter of 1X solution.
|
WB2
|
Microarray Wash Buffer 3,
1 liter of 1X solution
|
Arrayit Microarray Wash
Buffer 3 is a very low salt wash buffer for short oligonucleotides (<25-mers),
providing a high stringency rinse buffer for the third wash step prior to
scanning. Wash Buffer 3 is 0.2 µm-filtered and arrives ready to use as 1 liter
of 1X solution.
|
WB3
|
Warranty
Arrayit life sciences
products are sold for research purposes only. Arrayit brand products have been
scientifically developed and are sold for research purposes. Extreme care and
exact attention should be practiced in the use of the materials described
herein. All Arrayit brand products are subject to extensive quality control and
are guaranteed to perform as described when used properly. Any performance
issues should be reported to Arrayit immediately. Arrayit’s liability is
limited to the replacement of the product, or a full refund. Any misuse of this
product is the full responsibility of the user, and Arrayit makes no warranty
or guarantee under such circumstances. Pricing may vary up to 30% due to costs
associated with distribution, import taxes, duties, customs clearance and
shipping.