Browse Categories

Arrayit Microarray Consulting Services

Price: $5,000.00
Item Number: CNSL
Arrayit offers the market’s finest microarray consulting services from our top-trained experts. Our consulting sessions are provided worldwide to convey practical “how to” information from the world’s microarray tools and technology leader. Learn the fundamentals and principles that determine how microarray manufacturing tools and techniques are used and interpreted. Laboratory and lecture formats are available from our highly trained staff including complete training sessions via Internet. Please contact us directly for group rates and multi-session pricing and availability. Pricing is for up to 3 persons per 8-hour session. Consulting covers all aspects of microarray technology including microarray printers, microarray scanners, microarray hybridization stations, microarray tools, microarray reagents and microarray consumables.

Microarray Services - Complete Microarray Technology Consulting Services via Internet Including Microarray Printers, Scanners, Hybridization Stations, Reagents and Consumables

Arrayit consulting services cover all of the practical aspects of microarray technology:
1. Microarray printers
2. Microarray scanners
3. Hybridization stations
4. Tools
5. Reagents

Arrayit consulting services cover all of the microarray technology application areas:
1. Gene expression
2. Genotyping
3. Protein assays (antibodies, antigens and peptides)
4. Small molecule microarrays
5. Whole cell microarrays

Arrayit microarray consulting services also provided a "deep-dive" into specific areas including microarray printing:

These are the five key components to manufacture high quality microarrays:
1. Motion control system (microarray printer)
2. Microarray printing pins
3. Sample preparation
4. Slide surface chemistry
5. Printing environment

If any of these five criteria are not optimized, the quality of microarray printing will be compromised. Use this guide to diagnose microarray manufacturing inconsistency.

Technical Graphic
Based on decades of microarray manufacturing experience, theoretical modeling and feedback from thousands of customers, we have been able to establish a diagram that lists the most common sources of printing challenges posed as a series of questions (Fig. 1). If you’re not getting good printing, start by examining the microarray pins under a dissecting microscope and go from there. Issues will be easily diagnosed and solved if you are able to answer “yes” to all of these questions.


Figure 1. Arrayit's technical graphic poses five questions that most commonly impact microarray printing. Answering "yes" to all five questions greatly increases your chances of high quality microarray printing, as explained in greater detail below.

1. Are the microarray pins loading sample?
Physically damaged pins, pins clogged due to poor cleaning, or pins clogged with contaminated samples are common sources of irregular printing. Arrayit digitally measures each microarray pin we sell. We have essentially removed the mechanical differences from pin to pin that can cause irregular printing. However, mishandling pins, pins clogged with sample, and pins with contaminated surface tension properties are some common causes of printing problems. If you know the microarrayer is operating properly, check the pins under a dissecting microscope. Are they clean and free of contamination? Is there any physical damage to the Pin? If they are physically damaged, the tips are too small to repair. For an image of what a microarray pin should look like please view for an example Arrayit 946 microarray technology. If the pins are not loading sample and are not physically damaged, follow the cleaning instructions below to prepare the microarray printing pins to print virtually any type of sample. It is also recommended to use this cleaning procedure after every print run. This cleaning procedure takes only 15 minutes.

Microarray Pin Cleaning Procedure
Step 1. Wear powder free nitrile gloves for this entire process. Sonicate the pins in a 50-fold dilution of 20X Micro Cleaning Solution (Arrayit catalog # MCS), making sure the pins are properly position in the pin rack. During sonication, the pin in the rack should never make contact the sides or bottom of the bath. For best results, use the kit, see details by clicking here. Typically 5 minutes is long enough, but severely abused Pins that have had samples allowed to dry on the Pins may require longer sonication.

Step2. Rinse in hot tap water until all MCS is completely rinsed away. 2 minutes

Step 3.  Sonicate for 3 minutes in distilled water.  Never expose the Pins to de-ionized water. De-ionized water pulls ions out of the stainless steel of the Pins and promotes corrosion.

Step 4.  Blow dry with clean forced air.  Do not use air from canisters; the propellants will ruin the surface tension properties of the Pins.

Step 5.  Put the protective caps on the Pins now and they are ready to load into the robot and be used or tested. A storage box can be a helpful tool, click here for details.

You can easily determine if the pins are printing by observing the spotting of the solution while the pins are arraying the samples.  Arrayit's Micro Spotting Buffers (MSS, MSP, and PPB), and most other spotting buffers leave visible ‘dots ’ during the arraying process.  These 'dots' are due to the salts in the solution and will disappear during processing of the arrays leaving an invisible array of the attached DNA on the microarray substrate.  After printing you can hold the array up to a light source and usually visually determine if the spots were printed, and if there are any gross defects such as spot merging, or missing spots.   Finer evaluation of the array may require hybridization with a fluorescent labeled probe (protocol here).  

2. Is the wash/dry station working??
Pins must be completely clean and dry in order to load a new set of samples. If they are not, they will not load completely.  Pins that do not load completely with sample will run out of sample prematurely. A good wash dry station for a microarrayer can be seen here.

3. Are the samples prepared properly?
Often a printing problem can be blamed on damaged or contaminated Pins, but the real culprit is sample preparation. The smaller the assay, the cleaner the samples have to be.   If PCR products are being spotted, neither ethanol precipitation nor kits that use size exclusion as a purification method are recommended.  These methods can leave trace contamination that can clog Micro Spotting Pins and inhibit DNA attachment to the printing substrate. The use of membrane binding purification methods such as Arrayit’s PCR Purification Kit is recommended.

Included in sample preparation is having a consistent concentration and proper volume of DNA in each well of the sample pickup plate.  Large variations in concentrations from well to well will result in irregular spotting and hybridization. Also, amounts larger than 1 mm layer thick of sample in the sample pickup plate can cause large spots.  The cause of this is too much sample sticking to the outside of the Micro Spotting Pin.  To achieve good printing, use ~10 micro liters of sample in a 384 well polypropylene round or v bottom plate.

4. How about the substrates?
A high quality microarray is defined by having the same amount of DNA at each array location on the printing substrate.  If the substrate is not homogenous, meaning that it does not have the same amount of reactive groups at each array location on the substrate, then different amounts of DNA will attach to the surface.   Arrayit does not recommend using microscope slide glass as a printing substrate.  By nature, standard microscope slide glass is not homogenous.  Therefore, we have implemented the use of optical quality glass processed in a cleanroom to assure that when we derivatize the surface with either epoxide, aldehyde or amine reactive groups we get a homogenous surface. Start with microscope slide glass quality, get a microscope
quality, start with optical quality glass, and get an optically homogenous surface.  It is also important for consistent delivery of sample to have a flat printing surface.  Not only are standard microscope slides non-homogenous; microscope slide glass does not have consistent physical dimensions. Using a micrometer, we have measured microscope slide glass and have seen more than 50 micro differences in thickness from slide to slide. The difference in thickness changes the dwell time of micro spotting Pins on the surface. The longer the Pin touches to the surface, the more sample gets delivered. Without a flat printing surface, it’s more difficult to get a consistent delivery of sample.

5. Is the robot OK?
The most obvious component to good printing is the robot.  In addition to having precise repeatability and a good wash and dry station for Pins, a microarray must have a clean and enclosed humidity controlled environment.  Use humidity between 55-65%.  We recommend not less that 10-micron repeatability/accuracy in all three motions x, y and z.  Currently most of the commercial and some non-commercial microarrayers meet these criteria.  We recommend that you don’t try to convert a legacy liquid handling system into a microarray robot; most of them don’t have enough accuracy. If you’ve got a printing problem, check the wash/dry station of the robot to make sure it is functioning properly. Micro Spotting Pins must be completely clean and dry in order to load properly.

Spot Size
Factors that define spot size.
1. Size of the end of the tip
a. Larger tips make larger spots and visa versa
2. Dwell time of the pin on the surface
a. The longer a Pin touches the surface, the more sample will be delivered
3. Viscosity of the sample
a. More viscous samples will make smaller spots
4. Hydrophobicity of the substrate
a. The more hydrophobic the surface, the smaller the spot

This list discusses the factors to monitor to produce high quality microarrays. If these factors are controlled, we can guarantee that you will be able to manufacture high quality microarrays. Many of these steps are difficult to control when “homemade” systems, slides and purification systems are used.  With Arrayit producing affordable and high quality products to use, the steps get a lot easier to control. For more details download our presentation by clicking here.

To order ArrayIt® Brand Products email

Mailing Lists
Shopping Cart
Your cart is empty.